Amphibious Lift System.
| This Lift-System was developed for Emergency Flood-Relief in 1999. This can really become a life saving tool during the major floods in the future. With Global Warming, there's going to be more and more floods happening everywhere on Earth and it's getting worse. We might not be able to stop the natural disasters from happening but maybe we can help our selves & the people who are caught in the disaster a little better next time. |
| Here are close-up pictures of the Lift System being made. Many talented Auto-related people with some welding skill should be able to re-create this First Stage (Lift-System) without too much problems. Please don't become a thief, contact us and for a minimal fee ($100 for the first 1000) we will work with you to create a perfect system for you. 1) weight of the vehicle 2) front & rear weight difference 3) clearance 4) 3 or 5 piece Lift-System 5) method of power delivery (Tire only, Attachable Paddles, or additional Out Board) |
| 2nd Stage: Frame Replacement System. This method should be integrated into the Auto-Truck at the Manufacturing stage. This would be a Permanent Amphibious Lift-frame swap, simple way to convert normal trucks using Phantom Lift Frames instead of the heavy steel frames that sinks. |
| 3rd Stage: High Security Amphibious Vehicle. This would be a whole new kind of Protection Vehicle that's designed to stand-up against all kinds of abuse, possibly even terrorism acts like road side bombs if designed for that use. |
Re-route the Muffler ends
up to clear the water from
entering the muffler
system
Lifting the Suspension up
using lift-kit & balloons.
up to clear the water from
entering the muffler
system
Lifting the Suspension up
using lift-kit & balloons.
Making Paddles &
Wheel Adaptors for
your rear tire-rim for
more speed.
And then making
Wheel housing to
keep the water in,
the housing is built
to slide in & out to
adjust for paddles.
Wheel Adaptors for
your rear tire-rim for
more speed.
And then making
Wheel housing to
keep the water in,
the housing is built
to slide in & out to
adjust for paddles.
Making the frame work
according to the size
needed to keep the truck
afloat in the water (we can
help you figure out the size according
to the weight of your vehicle).
Cover the outside of the
frame using your choice
of material inc Aluminum
or Plastic material and fill
the hollow cavity with
Chemical Poly-Urethane
Anti-Flammable bonding
Foam Materials.
according to the size
needed to keep the truck
afloat in the water (we can
help you figure out the size according
to the weight of your vehicle).
Cover the outside of the
frame using your choice
of material inc Aluminum
or Plastic material and fill
the hollow cavity with
Chemical Poly-Urethane
Anti-Flammable bonding
Foam Materials.
We started our project
using just aggressive
Mud-Tires. Then we
stepped up to adding
Paddles, and finally even
popping in a 150 hp O/B
in the Bed for real speed.
using just aggressive
Mud-Tires. Then we
stepped up to adding
Paddles, and finally even
popping in a 150 hp O/B
in the Bed for real speed.
A very cheap way to
insure side stability in
rough waters.
This simple balloon
system's cost was less
than $200 for both side.
insure side stability in
rough waters.
This simple balloon
system's cost was less
than $200 for both side.
| We tried simple 3 piece design, then added side stability flotations that you attach & detach. Then we tried split rear for adding an 150 hp O/B in the bed of the truck, and we even tried adding expanding sides (permanent flotations that expands out of the rocker panel area) We can help you build your Amphibious Truck, if you have the need & some welding skill. Do you need Amphibious Vehicle, do you live in the flood area. CONTACT US, we are ready to help. |
Notice that there are
different flotation kits on
different vehicles.
White Chevy: 3-piece + side
flotation balloons.
Then another Chevy with
modified bed + Paddles
added onto the rear section.
Yellow Toyota: White 3 piece
lift with almost 200 % of
needed flotation. And black
6-piece lifts with expanding
sides and 150 hp O/B in bed.
different flotation kits on
different vehicles.
White Chevy: 3-piece + side
flotation balloons.
Then another Chevy with
modified bed + Paddles
added onto the rear section.
Yellow Toyota: White 3 piece
lift with almost 200 % of
needed flotation. And black
6-piece lifts with expanding
sides and 150 hp O/B in bed.
 | |  | |  |
| 5 Piece: Basic 3 piece + 2 side stabilizers Cheaper; Balloon side stabilizers / Good; Aluminum side stabilizers |
| 7 Piece: All Aluminum 5 piece System with integrated Hydraulic expanding side stabilizers + built in drive Paddle System (either attachable or integrated into dually wheels) |
| The PHANTOM Lift-System is a basic lift that is designed to fit under existing Trucks (We built 5 different Systems using TOYOTA & CHEVY Trucks, the raw material cost ranged from $500-$2000 for each Lift-System without labor) to turn regular 4x4 Trucks into Amphibious Trucks. Second Stage we proposed was to replace the existing frame with a new flotation lift frame A new frame replacement at the manufacturing level = lift frame built & installed on the truck at the factory. The Third Stage was to build a whole new vehicle (Light upper body, and drop-down propeller system integrated into the trans-axle) that would be virtually indestructible similar to our Marine Boats by using Chemically poured & bonded Single Foamed body structure (Light Aluminum framing + choice of metal outer & inner skins, and then the floor, wall and all cavities chemically formed using single-foam process) guaranteeing structure integrity making the Amphibious Vehicle virtually indestructible. |
Click on the small thumbnail pictures for LARGER PICTURES.
| All others that copy our Invention without our approval will be prosecuted by law. |
| Anyone interested in this product should contact us for further detailed information. |
| | | | |
All rights reserved (Stories, Drawings, Boat, Cars, E.T.C. Contained in the Web Site). O.K.